During the testsuite refactoring that significantly improved the DSF
suite (Commit 528de33113) some info
was lost from the code. This resurrects those comments.
Change-Id: I0a11dee2dcabb0800306880fc7c6217374bc337a
Signed-off-by: Jonah Graham <jonah@kichwacoders.com>
Allow to easily run only Supported or Unsupported tests
Only run Supported versions in test suites
Change-Id: I0d628c8aea28dad77df7943b8b1ee18df5bb6bcf
Most changes are cosmetics (name of local variables, javadoc, etc).
The note-worthy ones are:
1- Change terminology in IChangeReverseMethodHandler to be a little clearer.
This causes changes in multiple files, but it was all automated.
2- Remove ReverseDebugMethod.INVALID which was used as an error code
and not a ReverseDebugMethod value.
3- In GdbReverseToggleCommand, provide a different error message
if there is a failure to set ProcessTrace vs BranchTrace and tell user what to do.
4- Reworked GdbReverseToggleCommand#getReverseDebugMethod in attempt
to make the code easier to understand. No actual change in functionality.
Change-Id: Ibdc14faff1220e6a20319644b49e641c2101e762
When an address is resolved from an expression, the resulting address
may carry a memory space provided by the backend to associate
this address to a particular memory space.
The current interface for the memory space service (e.g.
IMemorySpaces2) can be used to parse the memory space contained in the
expression.
This update adds:
1) A new API method to resolve the memory space of an
IExpressionDMAddress instance
2) The use of the memory space service to attempt to resolve the memory
space.
Note: if there is no memory space service, the memory space defaults to
an empty string, which does not affect the default behaviour i.e.
when memory spaces are not used.
Change-Id: Idfe5669b26f84ee4e3e78f96f229ced75e6ec5c3
This patch solves Bug 488661 by moving last trace method to
GdbReverseToggleCommand. Since it is instantiated on a per session
basis.
Change-Id: Idafa196c7af36373ca08d5fc7de63024fe824c2b
Signed-off-by: raddepal <ravitheja.addepally@intel.com>
Null pointer checks were missing in GdbLaunch e.g. to cover the case
when the instance is not fully initialized e.g. invalid gdbserver path.
Change-Id: Ie5b593417aa831cb5b35b19f31d2b0a03b1fdc86
Signed-off-by: Alvaro Sanchez-Leon <alvsan09@gmail.com>
The TraceFileTest.java file has three tests which depend on each other.
Inter-dependency between tests is not good. This commit removes it.
Change-Id: Id910a5cea741c85959679e4b0a6981f603f19d13
Method MIThreadListIdsInfo#getThreadIds() has been removed. MIThreadListIdsInfo#getStrThreadIds() should be used instead.
Change-Id: Id6fb924a96b193012eaae0c8811b386873cd411c
in preparation for the introduction of thread groups syntax in GDB,
thread id needs to be handled as a String.
Change-Id: I379a92de9755ba0532265519ee70d1e199de811b
Preserve the user supplied backend path as a string so that it matches
what GDB (backend) later reports as a file name to resolve.
Condensed history:
Traditionally in source mapping container, the backend path was stored
as an IPath and that was used to compare against the debug information
being returned by GDB. This worked well when the platform compiled for
matched the platform run on, but when there was Windows/Linux together
that did not work. So as part of Bug 393791 a workaround was done to try
and use hand crafted MapEntrySourceContainer.createPath() instead of
Path constructor to preserve some of the differences. This solution had
its limitations too as UNC paths still could not be represented, See
open Bug 386675.
Change-Id: I4c8f62114a2c6019dc9d07ce446ac424be8b230c
Signed-off-by: Jonah Graham <jonah@kichwacoders.com>
From org.eclipse.cdt.debug.gdbjtag.core, constructor
GdbJtagDebugServicesFactory.GdbJtagDebugServicesFactory(String)
has been replaced by
GdbJtagDebugServicesFactory.GdbJtagDebugServicesFactory(String,
ILaunchConfiguration)
From org.eclipse.cdt.dsf.gdb, constructor
GdbDebugServicesFactory.GdbDebugServicesFactory(String)
has been replaced by
GdbDebugServicesFactory.GdbDebugServicesFactory(String,
ILaunchConfiguration)
From org.eclipse.cdt.dsf.gdb, class GdbDebugServicesFactoryNS has been
removed and its logic was merged into class GdbDebugServicesFactory
Change-Id: Ifecba752cfc12da62f1447027b11c0bb1f7c0171
Add support for gdb's "set substitute-path from to" by adding a new
service called GDBSourceLookup that uses GDB to perform the path
mapping.
The new GDBSourceLookup service uses the new GdbSourceLookupDirector to
get the set of paths that need mapping using GDB's "set
substitute-path" and the director resolves compilation path differently
so as to leave the GDB backend to handle the local path to compile path
resolution.
The MappingSourceContainer has been enhanced to allow a per mapping
container override of the new behaviour. This is a fallback as the
default behaviour when using GDB is to use "set substitute-path".
The MappingSourceContainerDialog exposes the new option in
MappingSourceContainer as a checkbox at the bottom of the path mapping
dialog in a backend agnostic way.
The new code is tested in methods called "sourceSubstitute*" and
mirror the same tests for the now non-backend handled version
which are "sourceMapping*". Note that
doMappingAndLaunch/doSubstituteAndLaunch have been updated to explicitly
check or uncheck the setIsMappingWithBackendEnabled setting
Change-Id: I122d7c597cd461d8e38c4f82522ccfdf9e51a5ba
Signed-off-by: Jonah Graham <jonah@kichwacoders.com>
this commit to introduce a test harness that allow
to reduce SIGNIFICALLY duplication of test per gdb version.
Tests is now parameterized with version and type (gdb vs gdbserver).
This commit flattens on of the tests as example rest is still
using an old way.
Parameters are defined externally now via Java variable like this
-Dcdt.tests.dsf.gdb.versions=gdb.7.7,gdbserver.7.7,gdb.7.11
Change-Id: I855449afba40e265c542dc5de7a3562548c97e8b
This is generic support for debugger commands though mi console bridge,
should be not gdb specific (have a simple gdb implementation though)
We add new breakpoint action called "Debugger Command"
Interface allows to enter arbitrary string(s)
This is interpreted by debugger as it see fit
For gdb implementation these are cli commands
Change-Id: I20ca0b8b094c724e1cf8b0691f4f6cab84a3737d
This is the first change to remove CDI from CDT. The CDI model
implementation is removed along with everything that directly
depends upon the implementation.
This commit does not include refactoring or moving classes. The few
insertions are the minimum necessary.
Change-Id: I80274e1a0d77bc7bb00a2afe4babc00c4f7613ae
Signed-off-by: Jonah Graham <jonah@kichwacoders.com>
I got some user feedback about some terminology they didn't quite
understand and this patch tries to address the issues by:
- Simplifying the name of the reverse debugging options.
- Simplifying the preference page.
The patch aslo removes un-used strings in plugin.properties.
Change-Id: I1e4487eeda23f81d391ef11ddbe7dd6feba401ec
The patch implements the event handler which
queries the trace method and triggers the necessary
update in the command handler.
Change-Id: I9c1827deb56dce099b7f455e942d1b6735a80643
Signed-off-by: raddepal <ravitheja.addepally@intel.com>
Signed-off-by: ravitheja.addepally <ravitheja.addepally@intel.com>
- Extend query for already connected process to all sessions for local
session types
Change-Id: I36591ff96d28977b4670700a2a2eb92c34945c7a
Signed-off-by: Teodor Madan <teodor.madan@nxp.com>
This is a follow-up to the work done to show errors when attaching to
processes. We were also not showing errors when trying to start a new
process using the "Debug new executable..." context menu option of the
debug view.
Change-Id: I9f68410b6d41a28df6f76f63b091a049a38b14e9
This patch adds the "Switch Off Tracing" option to
the select reverse debugging method pull down menu.
Change-Id: Ib184c1f4c1d1db781bea4468bc8c939bd27db27d
Signed-off-by: raddepal <ravitheja.addepally@intel.com>
