- add IOptionalBuildObjectPropertiesContainer interface to use for
objects that supply optional build properties
- add new IOptionalBuildProperties interface that defines
optional build properties donated by external plug-ins
- add new
- change IConfiguration to an IOptionalBuildObjectPropertiesContainer
- change IManagedProject to be an
IOptionalBuildObjectPropertiesContainer
- fix ProcessClosure to ensure that readers are not null before
accessing them
- fix Container launch delegate to look at project optional
build properties for active configuration to fetch connection
and image info and use said info to find a matching
launch or create a new one
- have Container launch delegate use the image name as part of
the launch config name
- have Container launch short-cut also use the project's
optional build properties for the active config to get
connection and image information before any defaulting
- change AutotoolsNewMarkerGenerator to store the command
launcher as an ICommandLauncher
- add new CommandLauncherFactory extension to cdt.core that
allows plug-ins to specify a CommandLauncherFactory that
will return an ICommandLauncher based on the project
- add macros for new extension to CCorePlugin
- add new CommandLauncherManager class that loads
CommandLauncherFactory extensions and is used to give
an ICommandLauncher wrapper that will go through the list
of CommandLauncherFactory extensions until one returns
non-null ICommandLauncher
- add code to RemoteCommandLauncher so it will use the
CommandLauncherManager to get the local launcher
- also change RemoteCommandLauncher to check at execution
time whether the command is local and in that case use
the local command launcher
- add new ICommandLauncherFactory interface
- add new ContainerCommandLauncher to launch
- add new ContainerCommandLauncherFactory class for returning
a ContainerCommandLauncher instance to launch commands
in a Docker Container
- change MakeBuilder to use CommandLauncherManager to get
its ICommandLauncher
- change CommandBuilder to use CommandLauncherManager too
- ditto for Builder and AbstractBuiltinSpecsDetector and
ExternalToolInvoker
- change Configuration to load/store optional build properties
as well as return the properties to get/set
- ditto for MultiConfiguration
- change ManagedProject to implement IOptionalBuildOptionProperties
interface
- ditto for ProjectType
- create new OptionalBuildProperties class to store optional
build properties for a configuration
- bump cdt.docker.launcher to 1.1.0
- use CommandLauncherFactory extension to define
ContainerCommandLauncherFactory
- add optional ContainerPropertyTab which allows the end-user to
optionally choose to build a C/C++ project in a Container
and specify the connection/image to use
- in LanguageSettingsSerializableSettings class, call the
CommandLauncherManager getLanguageSettingEntries method
to get the massaged language setting entries based on the
current list
- in LanguageSettingsProviderSerializer, try and get the
pooled entries using the cfg description so that it will
have the project and can use the CommandLauncherManager
to get entries from image
- in ContainerCommandLauncherFactory move cached headers under
a HEADERS directory in the plug-in area
- create a sub-directory for the connection and a sub-directory
for the image based on cleansed names
- store the real names of the connection and image to use
later in the DockerHeaderPreferencePage
- modify LanguageSettingsEntriesTab to force the horizontal
scroll bar to appear (this is a bug in SWT SashForm support
and the fix here isn't quite correct, but is better)
- add new DockerHeaderPreferencePage that allows user to
remove cached headers from images
- change C/C++ Docker preferences to be titled: Docker Container
- fix LanguageSettingsWorkspaceProvider.getSettingEntries method
to use the CommandLauncherManager so entries will be transformed
to use cached headers
- add BaseDatabindingModel class
- add DataVolumeModel class to model a volume mount
- add ContainerPropertyVolumes model to model volume specification
and selected volumes
- add properties to ContainerCommandLauncher to represent
volumes and selected volumes for a configuration
- add ContainerDataVolumeDialog for specifying a volume
mount by the end-user
- add a null detector for cfgDescription in
LanguageSettingsSerializableProvider
- fix AutotoolsNewMakeGenerator.getWinOSType to not specify "." for
working dir
- fix GCCBuiltinSpecsDetectorCygwin to not map paths to Cygwin if
the current configuration is enabled for container build
- add logic to ContainerCommandLauncher to look for Windows
file formats and change them to unix format and map
any "." working dir to be /tmp
- fix ContainerLauncherConfigurationDelegate similarly
- fix AbstractBuiltinSpecsDetector to pass in the current
configuration description when getting the CommandLauncher
since the current configuration may not be the active
configuration
- change ContainerPropertyTab to add Elf and GNU Elf binary parsers
when build in Container is chosen so that output executables
are treated as Binaries by the CDT project
- add documentationl for the ContainerPropertyTab in Build Settings and
the Data Volume dialog pop-up it brings up
- change CommandBuilder to accept a project as an argument
to its constructor and to pass this as an argument to
the CommandLauncherManager
- have StepBuilder pass project when creating a CommandBuilder
Change-Id: Ia78488b93056e6ec7ca83a6c87b3a9d2b9424943
Implemented by allowing users to specify type of error
markers to consider, as well as ability to print out
the error markers that are causing build to fail.
Change-Id: Iaa0b41be9ec1c1ff5268734697f361dac6fec49e
Signed-off-by: Jonah Graham <jonah@kichwacoders.com>
- add new FixitErrorParser that extends RegexErrorParser and is
used to replace the error parser for GNUCErrorParser
- add new FixManager class to bind a fixit message with its
problem marker
- modify ProblemMarkerFilterManager to register the last
accepted ProblemMarkerInfo for a particular resource so
the FixitErrorParser can find the last error marker for
the file that precedes the fixit message
- FixitErrorParser looks for fix-it messages and binds them
via FixitManager to the last error marker for the file
- add new Fixit class to contain the details of a gcc fix-it
- add new QuickFixForFixit which applies the gcc fix-it for the
file
- add new (.*) regex in codan.ui.checkers patterns that will
trigger before any other error and will look for the
fix-it message format
- change cdt.core to expose cdt.internal.errorparsers to
codan.checkers.ui
- change codan.core to expose codan.internal.core.model to
codan.checkers.ui
- fix CDocumentProvider.setOverlay method to not overlay
a CMarkerAnnotation that has a quick fix
- when deleting all C problem markers, also make a call
to FixManager.deleteAllMarkers() so markers aren't
left referenced
Change-Id: Ibf8ff7d8addb1bf092dc4ef35de0d92de0309589
When a toolchain is selected along with its builder, the builder gets
matched to a “real builder” (ManagedBuildManager.getRealBuilder). If the
builder is abstract, the builder is not in the possible list of matches,
as implemented in Builder.getMatchKey. This causes
getCurrentBuilderCompatibilityInfo to return null which is not handled.
This patch changes the base LLVM builder to a non-abstract one, which
solves this specific NPE.
Also, in order to be more helpful to the user in case it happens to
another toolchain, a null check was added with an error message that the
builder is incompatible. Then at least, it is more clear that something
is wrong and the user can pick a different builder.
Change-Id: I4d26c568dfe6307b496719c10908a36933fd3ab8
Signed-off-by: Marc-Andre Laperle <marc-andre.laperle@ericsson.com>
This removes a lot of pom.xml from the source tree. This is using the
"POM-less" Tycho functionality.
See
https://wiki.eclipse.org/Tycho/Release_Notes/0.24#POM-less_Tycho_builds
One advantage of this is that you do not need to update the version in
the pom.xml when you change it in the MANIFEST.MF because the pom.xml is
automatically generated. This also reduces a lot of the duplicated
information and pom.xml repetition.
- Maven 3.3 and up is required.
- Only eclipse-plugins and eclipse-features can be pom-less.
Repositories, target and others still have pom.xml.
- New parent poms are added because a parent is necessary directly one
level above the plug-in/feature that will have its pom generated
- Some test plug-ins had to be renamed .test -> .tests because it's
required so that it detects that it's a test plug-in
- Some suites were renamed so that they all use the same consistent name
"AutomatedIntegrationSuite"
- Profiles were added for the more common test configurations. They are
activated by the presence of simple .properties files that only serve to
activate the correct profile. The profiles:
- One for UI tests (UI present and start in UI thread)
- One for SWTBot tests (UI present and do not start in UI thread)
Other test plug-ins that are too different are kept intact and still
have
a pom.xml
- Fragments are kept intact since they all have different target
platform configurations
Change-Id: I9d73380eb766f547830c552daf08053a30b1845c
Signed-off-by: Marc-Andre Laperle <marc-andre.laperle@ericsson.com>
Pre-build will always run in parallel to compilation of source files
unless each and every source file depends on pre-build. Also, when
parallel build was enabled, the "Make build target" under "Workbench
Build Behavior" was ignored. Instead of doing make -j all, Eclipse ran
make -j pre-build main-build. While the intentions are good, make will
attempt to build pre-build and main-build in parallel for previous
stated reasons.
This patch changes two things:
1. Eclipse will consistently respect the "Workbench Build Behavior" for
both single- and multi-process build.
2. The generated makefile is changed to guarantee pre-build is run
first.
Changed from
all: pre-build main-build
to
all:
$(MAKE) --no-print-directory pre-build
$(MAKE) --no-print-directory main-build
Change-Id: Icf3a1057ee3b3cc8a04a433820492a4f469e17dd
Signed-off-by: Morten Kristiansen <millibit@gmail.com>
This change overcomes the Cannot run program "rm": Command line
too long error when there are hundreds to thousands of files.
This change only applies to the interal builder.
Change-Id: Idc32067e27d76e3b438b2b1a07376859c7c8d1e4
- changed gcc builtin settings providers to prefer non-shared
- added isIndexerAffected method override to ToolSettingsTab which
looks at new isIndexerAffected boolean
- add logic to ToolSettingsTab setOptions() method to look for
dirty options that return true for isForScannerDiscovery() or
are special options that affect include path or defines
- add performok method to ToolSettingsTab to look if isIndexerAffected
when user hits OK without hitting APPLY
- change the message for bringing up the question dialog for end-user
to choose whether to reindex or not
Change-Id: Icd740caafe638f272b6f1434d5817f2377ffe04a
ChangeLog is an archaic format for identifying what has changed in a
project. Fortunately more powerful version control systems are capable
of generating this information and displaying information such as this
paragraph in order to determine what has changed in a project and when.
Change-Id: Ia71a05fa51869c1adb193d94f71c28b3b36beb37
Signed-off-by: Alex Blewitt <alex.blewitt@gmail.com>
Eclipse warns if a String literal does not have a `//$NON-NLS-<n>$`
entry at the end of the line. However, for historic or formatting
reasons, many such occurrences in the CDT source have an intermediate
whitespace, such as `// $NON-NLS-<n>$`
Fix these so that the whitespace is removed between the // and $
characters.
Change-Id: Idc12398fe6e9d619af1d0b1b73fb8b6180da223c
Signed-off-by: Alex Blewitt <alex.blewitt@gmail.com>
When using a `StringBuilder` or `StringBuffer` to create a string message,
using implicit string concatenation inside an `.append()` call will
create a nested StringBuilder for the purposes of creating the arguments,
which will subsequently be converted to a String and then passed to
the outer StringBuilder.
Skip the creation of the intermediate object and String by simply
replacing such calls with `buffer.append(a).append(b)`.
Where values are compile time String constants, leave as is so
that the javac compiler can perform compile-time String concatenation.
Ensure that NEWLINE isn't appended in such a way since it is not
a compile time constant `System.getProperty("line.separator")`
Change-Id: I4126aefb2272f06b08332e004d7ea76b6f02cdba
Signed-off-by: Alex Blewitt <alex.blewitt@gmail.com>
There are many opportunities for replacing `StringBuffer` with
`StringBuilder` provided that the type isn't visible from the
public API and is used only in internal methods. Replace these
where appropriate.
Change-Id: I769ceb6eaee18d183fb0e00fa0d730651f8a7edb
Signed-off-by: Alex Blewitt <alex.blewitt@gmail.com>
The use of toString().toEmpty() is a potential code smell, and has
identified a couple of places where this pattern could be optimised.
Change-Id: I1a37e62ed8546a48151a494e9f24fea46d9d2497
Signed-off-by: Alex Blewitt <alex.blewitt@gmail.com>
In many cases a String's empty status is tested with `.equals("")`.
However, Java 1.6 added `.isEmpty()` which can be more efficient since
it compares the internal length parameter only for testing. Replace
code using the `.isEmpty()` variant instead.
Some tests for `"".equals(expr)` can be replaced with `expr.isEmpty()`
where it is already known that the `expr` is not null; however,
these have to be reviewed on a case-by-case basis.
Change-Id: I3c6af4d8b7638e757435914ac76cb3a67899a5fd
Signed-off-by: Alex Blewitt <alex.blewitt@gmail.com>
The implementation of `ToolReference::getToolCommand()` different from its
neighbours by checking if the `parent` was non-null. Change this so it looks for
the `parent` being null and swap the bodies of the `if` statement around to
maintain compatibility.
Change-Id: I8a188b350f94db9b1bd9d240b7a7320a930280a2
Signed-off-by: Alex Blewitt <alex.blewitt@gmail.com>
Replace all occurrences of `new String(expr)` with `expr` provided that the
`expr` is not a byte array or a char array.
Change-Id: Iecae801b83084908b60b9e146eba87550eac640d
Signed-off-by: Alex Blewitt <alex.blewitt@gmail.com>
Occurrences of `new String("...")` have been replaced with a direct reference
to the literal it was wrapping.
Change-Id: Iefb49a009f210db59e5724e0a232dba2e13292b1
Signed-off-by: Alex Blewitt <alex.blewitt@gmail.com>
Occurrences of `new String()` have been replaced with the equivalent `""` and
additional NON-NLS tags have been inserted in where appropriate.
Change-Id: I54cf71dcd0d5a92a675a71166d66949533de502b
Signed-off-by: Alex Blewitt <alex.blewitt@gmail.com>
Using `new Integer` and other wrapper types such as `new Character` results in
potential extra heap utilisation as the values are not cached. The built-in
`Integer.valueOf` will perform caching on numbers in the range -128..127 (at
least) using a flyweight pattern. In addition, parsing `int` values can be done
with `Integer.parseInt` which avoids object construction.
Adjust tests such as `"true".equals(expr)` to `Boolean.parseBoolean(expr)`.
Change-Id: I0408a5c69afc4ca6ede71acaf6cc4abd67538006
Signed-off-by: Alex Blewitt <alex.blewitt@gmail.com>
This reverts the changes we've made for language settings providers
so that I can start again with a cleaner approach.
Change-Id: Icddd5a465a8f217594af5b07011a56bf1dfdf014
Use IBuildConfiguration instead of ICConfigurationDescription.
Add adapters to convert back and forth between these. Create
IBuildConfiguration objects when configuration descriptors are
created.
Clean up formating of the code involved.
Change-Id: Iec5ca132dddbf990f116f96b4680ef5f7318e28b
of a tool and implement the new interface method.
Change-Id: Iee645519c1bf9fbe144021bc81bd6cf7434c3e4b
Signed-off-by: Guy Bonneau <guy.bonneau@videotron.ca>
managedbuilder.core was already calling getDebugOption with this key
but it was not exposed in the launch configutation.
Change-Id: Ib9e983ea9240bf6d911b2e2b94fc5929d91bcea1
Signed-off-by: Marc-Andre Laperle <marc-andre.laperle@ericsson.com>
Recommended way is to use e.g. InstanceScope.INSTANCE instead of new
InstanceScope() which is deprecated now.
Change-Id: I9fa8e53e180a480805bd0a57903e65b5c2de5f75
Signed-off-by: Alexander Kurtakov <akurtako@redhat.com>
