Revert serial.dll as the change does not impact windows
Change-Id: I968a3f40e8222a46d077aa5c6fde0a19740bd0a9
Signed-off-by: akhalid8lf <abdullah.dev0@gmail.com>
Some serial port drivers on Windows, notably usbser.sys, does not
care about DCB.fParity and only relies on DCB.Parity to contain
the correct value. In the case where we need to configure it for
no parity, the DCB.Parity field needs to be explicitly set to
NOPARITY.
The above statment has been checked using Wireshark and look at the
SET LINE CODING Request package (it contained ODDPARITY although
DCB.fParity=FALSE). The statement was also somewhat confirmed by
this post: https://stackoverflow.com/questions/36411498.
Change-Id: I2e2ab3da5da547e0420e3e61f91452ef0edeb755
Signed-off-by: Torbjörn SVENSSON <torbjorn.svensson@st.com>
CDT nows defaults to targetting Eclipse 4.11 along with dependencies in the
Eclipse 2019-03 simultaenous release.
Once consequence is that 32-bit and ppc64 fragments are removed.
Change-Id: I032fedb27a4e5086f10051b3b2ca9c9c59c3b965
Signed-off-by: Marc-Andre Laperle <malaperle@gmail.com>
The previous alignment of all the warnings/ignores
led to too many warnings that weren't there before. This
commit relaxes them a bit.
The core/org.eclipse.cdt.core/.settings/org.eclipse.jdt.core.prefs
is still the "master" copy, with
releng/scripts/check_code_cleanliness.sh containing the
exceptions that apply to test plug-ins.
Change-Id: Ibd4e31ade0b42b31e7cbe5a94f06c6fc15183a56
This was done by selecting all projects in Eclipse then
Source -> Clean Up... -> choosing:
- Format source code
- Remove trailing white spaces on all lines
and completing the wizard
Change-Id: I63685372c6bcc67719bcf145123bcb72e5b00394
The releng/scripts/apply_jdt_prefs_to_all_projects.sh was run to
copy standard settings to all other projects.
Change-Id: I4436c947d7f0142f56b709e661379c3eb54f666b
Added a loop in read(byte[], int, int) to block until any input is
available. Or until the port is closed, or an exception occurs.
Change-Id: I1ead6f465571274e77e74de685b8185c8cdde108
Signed-off-by: Waqas Ilyas <waqas.ilyas@gmail.com>
In the same vein as commit dff6b3bae3, this commit adds profiles
to trigger the build of the serial port component for the current
architecture, only when the profile is activated.
The serial port makefile is also improved to support building for
ppc64 and ppc64le architectures and to honour CFLAGS and LDFLAGS
that might be set in the environment, such as during RPM build.
I also hooked in the makefile "clean" targets so that invoking
"mvn clean verify" will do the right thing.
This simplifies the build for downstreams building from source
significantly.
Change-Id: Ie8cea95d953b256a1f62b77c76370ed7b3d81cee
Signed-off-by: Mat Booth <mat.booth@redhat.com>
Adds target, launch classes, and launch bar support for targets
intended to upload their code to flash using a Serial Port. The
port is co-ordinated with the Serial Terminal so that the terminal
is paused during the upload.
Also cleaned up the Generic Launch so it's not using the
External Tools launch which has a number of UX issues. This
simplifies the settings and gives us more control. And it's made
reusable for the Serial Flash launch.
Change-Id: I31e9970243fbf1cf22d027bbdb892fde104dbefe
Also restructures the pom.xmls to put the modules in the top level
so we can order them to have the test plugins build after them.
Change-Id: I2f0e4ebd252791fb8844cdf0f635d574946207aa
Add Arduino Serial Monitor as a Terminal Connector type. It uses the
Terminal's new cdtserial connector for communication and adds a
config panel that lets you pick the Arduino remote connection to
auto select the serial port. Also switched the Arduino launch
to fetch the serial port out of the global registry to pause and
resume the port while launching. The Terminal does not use the
remote connection to get the serial port.
Note: also adding the terminal as a dependency for builds. Yes,
further adds to our build cycle, but we're dealing with it so far
with o.e.remote.
Change-Id: I5a7cc9ffbf8ae60cd86e0e5440547d12202acbac
This will be used by components that need to pause an open serial
port to run some other functionality over the port. For example,
Arduino needs to pause the port to run the bootloader. This removes
the need for Serial ports to use o.e.remote.
Change-Id: Idb14598541ccf4e87c702cf2e5442335c64a6c65
This removes a lot of pom.xml from the source tree. This is using the
"POM-less" Tycho functionality.
See
https://wiki.eclipse.org/Tycho/Release_Notes/0.24#POM-less_Tycho_builds
One advantage of this is that you do not need to update the version in
the pom.xml when you change it in the MANIFEST.MF because the pom.xml is
automatically generated. This also reduces a lot of the duplicated
information and pom.xml repetition.
- Maven 3.3 and up is required.
- Only eclipse-plugins and eclipse-features can be pom-less.
Repositories, target and others still have pom.xml.
- New parent poms are added because a parent is necessary directly one
level above the plug-in/feature that will have its pom generated
- Some test plug-ins had to be renamed .test -> .tests because it's
required so that it detects that it's a test plug-in
- Some suites were renamed so that they all use the same consistent name
"AutomatedIntegrationSuite"
- Profiles were added for the more common test configurations. They are
activated by the presence of simple .properties files that only serve to
activate the correct profile. The profiles:
- One for UI tests (UI present and start in UI thread)
- One for SWTBot tests (UI present and do not start in UI thread)
Other test plug-ins that are too different are kept intact and still
have
a pom.xml
- Fragments are kept intact since they all have different target
platform configurations
Change-Id: I9d73380eb766f547830c552daf08053a30b1845c
Signed-off-by: Marc-Andre Laperle <marc-andre.laperle@ericsson.com>
Cleaned up some error messages. Especially when a system has no
serial ports. Also added a delay when ports are closed since some
serial port drivers (FDTI in particular) take a bit longer to
properly close. Especially important in pause situations where we
want to use the serial port for some other purpose right away.
Change-Id: Ifc9b7171682962e0aed8e9ed9ebf5472fc9e8206
(cherry picked from commit db3d5974e6)
gdb doesn't work when the serial port is tty.*. cu.* is supposed to
be for calling out, tty is for receiving. Our use cases are the former.
Change-Id: Iea15efbfa353eda3a7260c2f9c8a75a310f679f9
Build windows using mingw cross on Ubuntu. Clean up Makefiles
and remove unused Windows code.
Change-Id: Ic2d36ddbef7e4eecfcee12a496b923326c8a51c6
Signed-off-by: Jonathan Williams <jonwilliams@qnx.com>
