Fix and test
Change-Id: I785ecfd0715f1fa8ff86b87bd01d16ac6d5d5da2
Signed-off-by: Hansruedi Patzen <hansruedi.patzen@hsr.ch>
Signed-off-by: Thomas Corbat <tcorbat@hsr.ch>
Guard against NULL oldValues, which is legitimate, in which case use an
empty Map.
Change-Id: I78ac252d3e91d431340320719cb57b32145813f0
Signed-off-by: John Moule <evil_bandit_betamax@yahoo.co.uk>
The output of the call to gcc to pick out the defines and include paths
produces them on different streams, defines on stdout and paths on
stderr. Separate the scanning of the two into two threads.
Change-Id: I3173d3619e53d13a51a6e283eb320a618daacf21
When a line is double-clicked, or the highlight error is otherwise
changed, the redrawing of the highlighting was done by redrawing
the entire build console document. This was slow on very large
documents. Instead only redraw the line losing the highlight (if
any) and the line gaining the highlight.
In addition, as we only change the foreground colour to highlight,
avoid redrawing the background.
Change-Id: I5e652449715a588cb8702e0100a472d1f566e2a8
The BuildConsolePartitioner used to compute partitions from offsets
by iterating over the list of partitions. This strategy is fine
for small build outputs. But outputs in the 100,000+ line range
can have huge number of partitions. This commit updates the logic
to take advantage of the fact that the partitions are sorted
and contiguous to do binary searches to find the partition, and
uses a new method (computePartitioningAsList) to use a view onto
the original partitions list instead of significant copying.
Change-Id: I4395df36431a6ae45e6b77d6f76fd29532347ac5
This patch adds parsing and semantic support for lambda init-captures.
Change-Id: Ia5f39ea6f8780ecd6a9685f432bcbdf39e09c82a
Signed-off-by: Hansruedi Patzen <hansruedi.patzen@hsr.ch>
Change in super-hierarchy caused API breakage. As these interfaces
have long since been deprecated, rather than adding default methods
for them, simply mark them as noimplement/noextend. The implementation
in CDT already has the new effective method - getAttributeSpecifiers() -
implemented.
Change-Id: I252fdeb33c0edcbe73338dc6fca477201bd4d468
Added a loop in read(byte[], int, int) to block until any input is
available. Or until the port is closed, or an exception occurs.
Change-Id: I1ead6f465571274e77e74de685b8185c8cdde108
Signed-off-by: Waqas Ilyas <waqas.ilyas@gmail.com>
Within CDT new constants in interfaces do not require major version
increment, just a commented API filter. However in this case as the
interface is a grabbag for constants, it is even more appropriate
to mark it noextend/noimplement
Change-Id: I1ac6da12093bdd3e92cfa51c097383c9964f41a2
This does not happen in Eclipse using the target platform directly,
and when this last happened for [9.0.0] this workaround
worked, as documented in https://bugs.eclipse.org/bugs/show_bug.cgi?id=530207#c1
Change-Id: I55ce926c0ad73e78d24d1c0e78a6db7cce4d101e
With this patch we allow any keyword to be used as a UDL operator, which
for example GCC compiles fine with. They are then no longer highlighted
as keywords but colored the same as normal text. This can be overridden
by coloring overloading operators differently.
Change-Id: If80faf0f3dc599ab4f12fe98977c556aaaefe6aa
Signed-off-by: Hansruedi Patzen <hansruedi.patzen@hsr.ch>
The name of the JTAG probe is not translateable since the name is saved
as-is in the launch configuration. To make the string translateable, use
the id instead to select probe implementation.
Change-Id: Id7e654ea1e26f47cd1c8ccfec857a94f3be9e0ad
Signed-off-by: Torbjörn Svensson <torbjorn.svensson@st.com>
Signed-off-by: John Dallaway <john@dallaway.org.uk>
- add check for network ports coming back empty for a Container
launch and if so, fall-back to use the ip address of the Container
for the remote host
Change-Id: I83d68a10e2dc92f7d0f27bb9dec304388594b4a3
Changed GCC build parser to handle simple defines like "-D FOO"
and defines them to 1.
Bug: https://bugs.eclipse.org/bugs/show_bug.cgi?id=534454
Change-Id: Ic9065914bc82dafc43d0814f4fed27a26eeeeb28
Signed-off-by: Eric Woestman <woestman@ensoftcorp.com>
Return the session id from setDebugContext when dmContext is
IExecutionDMContext. This session id is needed in
DisassemblyPart.updateDebugContext()
Change-Id: I28f51d990f2b9c51718e5859279ea252091e3beb
We want to hold the index read lock while generating the guesses, but we
don't need an AST; we already have the one built for content assist.
Change-Id: I5a60aaca24ce345f5ae387664e025e6fa39cd9d2
The UI is using ManagedBuildManager to build a specified set of
configurations.
Insead of duplicating the logic (since clean does not support argument
transfer from HeadlessBuilder all the way to CommonBuilder), call the
public function for building a set of configurations.
WARNING: This fix is relying on a race condition in
ManagedBuildManager.buildConfigurations() since that method swaps the
"active configuration" while invoking the builder for the clean target.
Change-Id: I422a22e43a0acbef85420c04028475d61ad2ff85
Signed-off-by: Torbjörn Svensson <torbjorn.svensson@st.com>
- fix problem with launch targets not being set correctly
- for ContainerTargetTypeProvider, make init() and changeEvent()
synchronized
- move the test for ESTABLISHED connection after getImages()
in ContainerTargetTypeProvider.init() method so that we don't
see the connection as being UNKNOWN
- move addConnectionManagerListener() call in init() to be
just after we fetch the list of current connections
- in ContainerGCCToolChainProvider, make init() and changeEvent()
synchronized and move addConnectionManagerListener call to
just after connections list are acquired
Change-Id: I24880a77755d634e8bce85db4f3354cf5ad7671d
If we can't tell from the second element, try the third. If
it's linux, we're good. If it's elf, use the second element.
This catches the esp32 xtensa compiler which is driving this
change and make sure we don't mess up too many others.
Change-Id: I4650e5fa309677c596e9f5f64f50bcc2ebdef334
This commit resolves some of type resolution errors for C++17 <auto> templates.
Change-Id: Ibdd3dcc0b7740bce1d6f390d034e1ce67c27be58
Signed-off-by: Vlad Ivanov <vlad@ivanov.email>
This will allow us to use that value in external tool launches such
as those used by the Serial Flash launch configuration.
Also removal of the missing src source folder entry in meson.ui.editor.
Change-Id: I1033bdc0c18c9822490a9b8602cef83a42f7262d
- fix MesonBuildConfiguration to use startBuildProcess instead
of CommandLauncherManager
- change CBuildConfiguration startBuildProcess() method to accept
a build directory and to replace environment variables based
on input parameter
- fix CBuildConfiguration watchProcess routines to ensure that the
ReaderThreads have completed processing output to the console
- change StandardBuildConfiguration and CMakeBuildConfiguration to
pass the working directory to startBuildProcess
Change-Id: Icb4f2d076f0e6bb1513b20f6f198f720eae07e51
Move to latest CBI plugins 1.1.5.
Use mylyn docs 3.0.24 in autotools docs generation.
Change-Id: I077afde458c654e40db44bec77b3049efe9715af
Signed-off-by: Alexander Kurtakov <akurtako@redhat.com>
Resolve project-related string variables within the GDB command, based
on the launch configuration rather than the current selection.
Change-Id: I6fc5d2f1de515624aff59397de60d0c394acf72f
Signed-off-by: John Dallaway <john@dallaway.org.uk>
- fix CMakeBuildConfigurationProvider to not verify if a toolchain
file exists which doesn't occur for Container Build configurations
- add new ICBuildConfigurationManager2 interface that adds new
recheckConfigs() method, make CBuildConfigurationManager
implement this new interface
- add new recheckConfigs() method to CBuildConfigurationManager so
that if a Docker Connection is enabled, the list of invalid configs
can be rechecked and those that are now valid can be removed from
the noconfigs list
- have ContainerGCCToolChainProvider implement
IDockerConnectionManagerListener and register itself as a listener
during init
- add new changeEvent() method as part of a listener that will add
toolchains for connections that are added/enabled and similarly
will delete toolchains for connections that are removed/disabled
- do the same with ContainerTargetTypeProvider (making it be an
IDockerConnectionManagerListener and adding/deleting targets based
on whether a Docker Connection is added/enabled or deleted/disabled
- as well during the init process of ContainerTargetTypeProvider
remove any targets for Connections that aren't established
Change-Id: Id5e9415eaa770ef7f6ba1ddd11312ed003585391
Include the error message in the message shown directly in the error
dialog.
Change-Id: I8d6e65353750ee59966ede59b75ebc6256658cb6
Signed-off-by: Samuel Hultgren <samuel.hultgren@st.com>
When shutting down eclipse and there is an active debug session, eclipse
might deadlock if it can't destroy the debug session and would normally
leave a zombie process for the eclipse instance. This fix allows
eclipse to properly shutdown if the debug session is destroyed in less
than 1 minute, else the IDE will simply be terminated.
Change-Id: Icb9b019c7ff2ec9cdc9870a392a657fe0dfde81b
Signed-off-by: Torbjörn Svensson <torbjorn.svensson@st.com>
Execute the pre and post build steps as part of the build when using
the internal builder in parallel mode.
Change-Id: I840da0d7025597dc5b3edc1bb54a5ca45b6e2e86
Signed-off-by: Torbjörn Svensson <torbjorn.svensson@st.com>
Signed-off-by: Samuel Hultgren <samuel.hultgren@st.com>
