diff --git a/core/org.eclipse.cdt.ui/src/org/eclipse/cdt/ui/newui/Messages.properties b/core/org.eclipse.cdt.ui/src/org/eclipse/cdt/ui/newui/Messages.properties
deleted file mode 100644
index 1e00e332383..00000000000
--- a/core/org.eclipse.cdt.ui/src/org/eclipse/cdt/ui/newui/Messages.properties
+++ /dev/null
@@ -1,554 +0,0 @@
-###############################################################################
-# Copyright (c) 2000, 2010 IBM Corporation, QNX Software Systems, and others.
-# All rights reserved. This program and the accompanying materials
-# are made available under the terms of the Eclipse Public License v1.0
-# which accompanies this distribution, and is available at
-# http://www.eclipse.org/legal/epl-v10.html
-#
-# Contributors:
-# IBM - Initial API and implementation
-# QNX Software Systems - [272416] Rework the working set configurations
-###############################################################################
-
-# ----------- Configuration Selection Page -----------
-BuildPropertyPage.label.Platform=Project Type:
-BuildPropertyPage.label.Configuration=Configuration:
-BuildPropertyPage.label.Active=Active configuration
-BuildPropertyPage.label.Settings=Configuration Settings
-BuildPropertyPage.label.AddConfButton=Manage...
-BuildPropertyPage.selection.configuration.all=All configurations
-BuildPropertyPage.tip.platform=Select a platform for the project
-BuildPropertyPage.tip.config=Select the configuration to edit
-BuildPropertyPage.tip.manageconf=Manage configurations of the project
-BuildPropertyPage.tip.remconf=Remove configurations for the platform
-BuildPropertyPage.manage.title=Manage
-BuildPropertyPage.error.Unknown_tree_element=Unknown type of element in tree of type {0}
-BuildPropertyPage.error.version_low=The Managed Make project settings for this project are not available.
-BuildPropertyPage.defaults.title=Reset Configuration Tools
-BuildPropertyPage.defaults.message=This action will reset all of the tools in the selected configuration to their default settings.\n\nDo you want to proceed? 
-BuildPropertyPage.changes.save.title=Apply Configuration Changes
-BuildPropertyPage.changes.save.question=You have made changes to the {0} configuration.\n\nDo you want to apply these changes before switching to the {1} configuration? 
-BuildPropertyPage.changes.save.error=The configuration changes could not be applied.
-BuildPropertyPage.unsupported.proj=The project support is not installed on the system
-BuildPropertyPage.unsupported.config=The configuration support is not installed on the system
-BuildPropertyPage.config.notselected=No configurations selected
-
-# ----------- Managed Build Custom Wizard Page Manager Error Strings -----------
-MBSCustomPageManager.error0=Unknown element type 
-MBSCustomPageManager.error1=\ for extension point 
-MBSCustomPageManager.error2=Unknown child element type 
-MBSCustomPageManager.error3=\ for wizardPage element in extension point 
-MBSCustomPageManager.error4=Missing projectType ID
-MBSCustomPageManager.error5=Missing toolchain ID
-MBSCustomPageManager.error6=Missing nature ID
-
-
-# ----------- Managed Build Preference Page -----------
-BuildPreferencePage.label.Settings=Workspace Settings
-BuildPreferencePage.job.rebuild=Rebuilding the Managed Projects
-BuildPreferencePage.apply.internal.error=An Internal error has occurred. Please check error log.
-
-#--------------- Resource Configuration Selection Page --------------
-ResourceBuildPropertyPage.defaults.title=Reset Resource Configuration Tool
-ResourceBuildPropertyPage.defaults.message=This action will reset all options of the tool in the current resource configuration to their default settings.\n\nDo you want to proceed? 
-
-# ----------- New Env Var Dialog -----------
-NewEnvVarDialog.label.name=Name
-NewEnvVarDialog.label.value=Value
-NewEnvVarDialog.label.delimiter=Delimiter
-NewEnvVarDialog.label.operation=Operation
-NewEnvVarDialog.label.operation.replace=Replace
-NewEnvVarDialog.label.operation.prepend=Prepend
-NewEnvVarDialog.label.operation.append=Append
-NewEnvVarDialog.label.operation.remove=Delete
-NewEnvVarDialog.label.value.prepend=Prepended Value
-NewEnvVarDialog.label.value.append=Appended Value
-NewEnvVarDialog.label.value.undef=<UNDEFINED>
-NewEnvVarDialog.label.title.new=Define a new variable
-NewEnvVarDialog.label.title.edit=Edit existing variable
-NewEnvVarDialog.label.status.cannot.create=The "{0}" Variable can not be created by user
-
-# ----------- Macros Block -----------
-MacrosBlock.label.header.name=Name
-MacrosBlock.label.header.type=Type
-MacrosBlock.label.header.value=Value
-MacrosBlock.label.button.new=New
-MacrosBlock.label.button.edit=Edit
-MacrosBlock.label.button.delete=Delete
-MacrosBlock.label.button.check.chow.parent=Show parent context Build Variables
-MacrosBlock.label.user.macros=User Build Variables
-MacrosBlock.label.system.macros=System Build Variables
-MacrosBlock.label.delete.confirm.title=Build Variable Deletion Confirmation
-MacrosBlock.label.delete.confirm.message=Are you sure you want to delete the selected user Build Variable(s)? 
-MacrosBlock.label.delete.all.confirm.title=Build Variables Deletion Confirmation
-MacrosBlock.label.delete.all.confirm.message=Are you sure you want to delete all user Build Variables?
-MacrosBlock.label.value.eclipse.dynamic=<ECLIPSE DYNAMIC VARIABLE>
-MacrosBlock.label.type.text=String
-MacrosBlock.label.type.text.list=String List
-MacrosBlock.label.type.path.file=File
-MacrosBlock.label.type.path.dir=Directory
-MacrosBlock.label.type.path.file.list=File List
-MacrosBlock.label.type.path.dir.list=Directory List
-MacrosBlock.label.type.path.any=Path
-MacrosBlock.label.type.path.any.list=Path List
-
-# ----------- New Build Macro Dialog -----------
-NewBuildMacroDialog.label.value=Value:
-NewBuildMacroDialog.label.type=Type:
-NewBuildMacroDialog.label.type.text=String
-NewBuildMacroDialog.label.type.text.list=String List
-NewBuildMacroDialog.label.type.path.file=File
-NewBuildMacroDialog.label.type.path.dir=Directory
-NewBuildMacroDialog.label.type.path.file.list=File List
-NewBuildMacroDialog.label.type.path.dir.list=Directory List
-NewBuildMacroDialog.label.type.path.any=Path
-NewBuildMacroDialog.label.type.path.any.list=Path List
-NewBuildMacroDialog.label.browse=Browse
-NewBuildMacroDialog.label.title.new=Define a New Build Variable
-NewBuildMacroDialog.label.title.edit=Edit Existing Build Variable
-NewBuildMacroDialog.label.list.title=Value of Build Variable
-NewBuildMacroDialog.label.status.cannot.create=The "{0}" Variable can not be created by user
-
-# ------------Resource Configuration Selection Page
-ResourceBuildPropertyPage.label.ActiveResource=Active Resource configuration
-ResourceBuildPropertyPage.label.ResourceSettings=Resource Configuration settings
-ResourceBuildPropertyPage.label.Configuration=Configuration:
-ResourceBuildPropertyPage.label.ExcludeCheckBox= Exclude from build
-ResourceBuildPropertyPage.selection.configuration.all=All configurations
-ResourceBuildPropertyPage.label.ToolTree=Tools
-ResourceBuildPropertyPage.label.ToolOptions=Options
-ResourceBuildPropertyPage.label.NotMBSFile=The project is closed or the file is not contained within a Managed Make project.
-ResourceBuildPropertyPage.error.version_low=The Managed Make project settings for this project are not available.
-ResourceBuildPropertyPage.tip.excludecheck=Exclude the file from building in the selected configuration
-ResourceBuildPropertyPage.tip.config=Select the configuration to edit
-ResourceBuildPropertyPage.unsupported.proj=The project support is not installed on the system
-ResourceBuildPropertyPage.unsupported.config=The configuration support is not installed on the system
-ResourceBuildPropertyPage.config.notselected=No configurations selected
-ResourceBuildPropertyPage.rc.non.build=Managed Build settings for this resource are not available
-ResourceBuildPropertyPage.rc.generated=The selected resource is created by the buildfile generator
-
-# ----------- Languages Page
-
-CLanguagesPropertyPage.label.ActiveResource=Active Resource configuration
-CLanguagesPropertyPage.label.ResourceSettings=Known languages
-CLanguagesPropertyPage.label.ApplyToAllCheckBox=Apply changes to all configurations
-CLanguagesPropertyPage.label.Configuration=Configuration:
-
-# ----------- Resource Custom Build Step Block -----------
-ResourceCustomBuildStepBlock.label.settings=Custom Build Steps
-ResourceCustomBuildStepBlock.label.tool.group=Resource Custom Build Step
-ResourceCustomBuildStepBlock.label.applicability=Custom Build Step Applicability
-ResourceCustomBuildStepBlock.label.applicability.rule.before=Apply Custom Build Step Before Other Tools
-ResourceCustomBuildStepBlock.label.applicability.rule.after=Apply Custom Build Step After Other Tools
-ResourceCustomBuildStepBlock.label.applicability.rule.override=Apply Custom Build Step Overriding Other Tools
-ResourceCustomBuildStepBlock.label.applicability.rule.disable=Disable Custom Build Step
-ResourceCustomBuildStepBlock.label.input.filenames=Additional Input file name(s):
-ResourceCustomBuildStepBlock.label.output.filenames=Output file name(s):
-ResourceCustomBuildStepBlock.label.command.cmd=Command:
-ResourceCustomBuildStepBlock.label.description.desc=Description:
-ResourceCustomBuildStepBlock.tip.applicability=specifies how to apply the custom build step with respect to other resource configuration tools
-ResourceCustomBuildStepBlock.tip.inputs=a semicolon separated list of additional input files for this build step.  Paths are interpreted as relative to the Project directory.
-ResourceCustomBuildStepBlock.tip.outputs=a semicolon separated list of the output files produced by this build step.  Paths are interpreted as relative to the Build directory.
-ResourceCustomBuildStepBlock.tip.command=a semicolon separated list of commands or a single command to be executed by this build step.  Paths are interpreted as relative to the Build directory.
-ResourceCustomBuildStepBlock.tip.announcement=a message to be output in the build log upon execution of this build step
-ResourceCustomBuildStepBlock.defaults.title=Reset Resource Custom Build Step
-ResourceCustomBuildStepBlock.defaults.message=This action will reset the resource custom build step to the default settings.\n\nDo you want to proceed?
-
-# ----------- Entry Dialog -----------
-BrowseEntryDialog.error.Folder_name_invalid = Folder name invalid
-BrowseEntryDialog.message.file = File:
-BrowseEntryDialog.message.directory = Directory:
-BrowseEntryDialog.file.title.add=Add file path
-BrowseEntryDialog.dir.title.add=Add directory path
-BrowseEntryDialog.file.title.edit=Edit file path
-BrowseEntryDialog.dir.title.edit=Edit directory path
-BrowseEntryDialog.wsp.dir.dlg.title=Folder selection
-BrowseEntryDialog.wsp.file.dlg.title=File selection
-BrowseEntryDialog.wsp.dir.dlg.msg=Select a folder from workspace:
-BrowseEntryDialog.wsp.file.dlg.msg=Select a file from workspace:
-BrowseEntryDialog.wsp.file.dlg.err=The selected element is not a file.
-BrowseEntryDialog.wsp.dir.dlg.err=The selected element is not a directory.
-BrowseEntryDialog.fs.dir.dlg.msg=Select a folder from file system:
-
-# ----------- New Configuration -----------
-NewConfiguration.label.name=Name:
-NewConfiguration.label.description=Description:
-NewConfiguration.label.group=Copy settings from
-NewConfiguration.label.copy=Default configuration:
-NewConfiguration.label.clone=Existing configuration:
-NewConfiguration.label.showall=Show unsupported configurations 
-NewConfiguration.label.warning=Note: The configuration name will be used as a directory name in the file system.  Please ensure that it is valid for your platform. 
-NewConfiguration.error.duplicateName=A configuration named "{0}" already exists.
-NewConfiguration.error.caseName=A configuration name that differs only in case to "{0}" exists.
-NewConfiguration.error.invalidName=The name "{0}" is invalid.
-
-# ----------- Rename Configuration -----------
-RenameConfiguration.label.name=Name:
-RenameConfiguration.label.description=Description:
-RenameConfiguration.label.warning=Note: The configuration name will be used as a directory name in the file system.  Please ensure that it is valid for your platform. 
-RenameConfiguration.error.duplicateName=A configuration named "{0}" already exists.
-RenameConfiguration.error.caseName=A configuration name that differs only in case to "{0}" exists.
-RenameConfiguration.error.invalidName=The name "{0}" is invalid.
-
-# ----------- Target/Config management dialog -----------------
-ManageConfig.label.configs=Manage Configurations
-ManageConfig.label.rename=Rename...
-ManageConfig.label.conversionTargetLabel=Tool chain conversion targets:
-ManageConfig.label.convertTarget=Convert
-ManageConfig.label.new.config.dialog=Create Configuration
-ManageConfig.label.rename.config.dialog=Rename Configuration
-ManageConfig.deletedialog.message=Are you sure you want to delete the "{0}" configuration?
-ManageConfig.deletedialog.title=Confirm Delete
-ManageConfig.tip.convert=Converts the selected configuration to use a tool chain selected in the conversion target list
-ManageConfigDialog.1=Configuration
-ManageConfigDialog.2=Description
-ManageConfigDialog.3=Status
-ManageConfigDialog.4=Set Active
-ManageConfigDialog.5=Active
-ManageConfigDialog.0=Manage Configurations
-ManageConfig.tip.conversionTarget=A list of conversion targets available for the selected configuration 
-
-# Toolchain Conversion Target confirmation Dialog
-ConfigurationConvert.confirmdialog.message=Currently the "{0}" Configuration uses "{1}" toolchain. After conversion it will use "{2}" toolchain. Do you want to proceed?
-ConfigurationConvert.confirmdialog.title=Confirm Configuration Conversion
-
-# ----------- Build Property Common -----------
-BuildPropertyCommon.label.title=Enter Value
-BuildPropertyCommon.label.new=New...
-BuildPropertyCommon.label.remove=Delete
-BuildPropertyCommon.label.up=Up
-BuildPropertyCommon.label.down=Down
-BuildPropertyCommon.label.editVar=Edit...
-BuildPropertyCommon.label.addVar=Add
-BuildPropertyCommon.label.message=Value:
-BuildPropertyCommon.label.browse=Browse...
-BuildPropertyCommon.label.configs=Defined configurations:
-
-# ----------- Field Editors -----------
-Multiline.error.message=Please give correct input
-
-# ----------- Build Tool Settings -----------
-BuildToolSettingsPage.alloptions=All options:
-BuildToolSettingsPage.tool.command=Command:
-BuildToolSettingsPage.tool.commandLinePattern=Command\nline pattern:
-BuildToolSettingsPage.tool.advancedSettings=Expert settings:
-
-# ----------- File List Control -----------
-FileListControl.add=Add...
-FileListControl.delete=Delete
-FileListControl.edit=Edit...
-FileListControl.moveup=Move Up
-FileListControl.movedown=Move Down
-FileListControl.filedialog.title=Select File
-FileListControl.dirdialog.title=Select Include Directory
-FileListControl.dirdialog.desc=Select Include Paths
-FileListControl.deletedialog.message=Are you sure you want to remove the selected entries?
-FileListControl.deletedialog.title=Confirm Remove
-FileListControl.editdialog.title=Edit Dialog
-FileListControl.newdialog.title=New Dialog
-FileListControl.button.workspace=Workspace...
-FileListControl.button.fs=File system...
-FileListControl.BrowseEntryDialog.wsp.dir.dlg.msg=Select one or more Workspace Folders
-FileListControl.BrowseEntryDialog.wsp.file.dlg.msg=Select one or more Workspace Files
-FileListControl.BrowseEntryDialog.wsp.file.dlg.err=One of the elements selected isn't a file
-# ----------- Property Page ----------
-MngMakeProjectPropertyPage.closedproject=Project Closed
-MngMakeProjectPropertyPage.internalError=An Internal error has occurred. Please check error log.
-
-# Copies from org.eclipse.ui.workbench
-showAdvanced = &Advanced >>
-hideAdvanced = << &Advanced
-NewFolderDialog.folderNameEmpty = Folder name must be specified
-
-# Project Conversion Dialog messages
-ProjectConvert.confirmdialog.title=Confirm Project Conversion
-ProjectConvert.confirmdialog.message=The selected project {0} will be converted. Do you want to proceed ?
-
-ProjectConvert.conversionErrordialog.title=Project Conversion Error
-ProjectConvert.conversionErrordialog.message=Error has occurred during the conversion of the project {0} .
-
-ProjectConvert.noConverterErrordialog.title=Project Conversion Error
-ProjectConvert.noConverterErrordialog.message=There are no converters available to convert the project {0} .
-
-ProjectConvert.title=Project Converters for {0}
-PropertyMultiCfgTab.0=* This functionality is experimental *
-PropertyMultiCfgTab.1=Enable multiple configurations setting
-PropertyMultiCfgTab.10=Add/remove/change affected elements, do not touch others
-PropertyMultiCfgTab.11=Replace existing string lists with string list shown to user
-PropertyMultiCfgTab.3=String List Display Mode
-PropertyMultiCfgTab.4=Define how string lists from different configurations should be combined for display when lists are not equal:
-PropertyMultiCfgTab.6=Show common elements (conjunction)
-PropertyMultiCfgTab.7=Show all elements except doubles (disjunction)
-PropertyMultiCfgTab.8=String List Write Mode
-PropertyMultiCfgTab.9=Define how to save changes in string lists for different configurations:
-PropertyPageDefsTab.0=Show "Manage Configurations..." button
-PropertyPageDefsTab.1=Display "Data Hierarchy" tab
-PropertyPageDefsTab.10=Display "Export Settings" tab
-PropertyPageDefsTab.11=Save Property Dialog Bounds
-PropertyPageDefsTab.12=Save size and position
-PropertyPageDefsTab.13=Save size only
-PropertyPageDefsTab.14=Do not save at all
-PropertyPageDefsTab.15=Center dialogs on screen
-PropertyPageDefsTab.16=Display tool option tips of "Tool Settings" tab at fixed location
-PropertyPageDefsTab.4=Display "Tool Chain Editor" tab
-PropertyPageDefsTab.5=Discovery Profiles Naming Rule
-PropertyPageDefsTab.6=Show disc. page names if they are unique. Else names + profile IDs.
-PropertyPageDefsTab.7=Show disc. page names if they are unique. Else show profile IDs.
-PropertyPageDefsTab.8=Always show names + profile IDs
-PropertyPageDefsTab.9=Always show profile IDs only
-PropertyPageDefsTab.showIncludeFileTab=Display "Include Files" tab
-ProjectConvert.convertersList=Converters List
-
-ScannerConfigOptionsDialog.title=Discovery Options
-ScannerConfigOptionsDialog.description=Set the scanner configuration discovery options for this project
-ScannerConfigOptionsDialog.scGroup.label=Automated discovery of paths and symbols
-ScannerConfigOptionsDialog.scGroup.enabled.button=Automate discovery of paths and symbols
-ScannerConfigOptionsDialog.scGroup.problemReporting.enabled.button=Report path detection problems
-ScannerConfigOptionsDialog.scGroup.selectedProfile.combo=Discovery profile:
-ScannerConfigOptionsDialog.profile.group.label=Discovery profile options
-ScannerConfigOptionsDialog.boProvider.parser.enabled.button=Enable build output scanner info discovery
-ScannerConfigOptionsDialog.boProvider.open.label=Load build output from file
-ScannerConfigOptionsDialog.boProvider.browse.button=Browse...
-ScannerConfigOptionsDialog.boProvider.browse.openFileDialog=Build output file:
-ScannerConfigOptionsDialog.boProvider.load.button=Load
-ScannerConfigOptionsDialog.siProvider.parser.enabled.button=Enable generate scanner info command
-ScannerConfigOptionsDialog.siProvider.command.label=Compiler invocation command  
-ScannerConfigOptionsDialog.siProvider.browse.button=Browse...
-ScannerConfigOptionsDialog.siProvider.browse.runCommandDialog='gcc' command:
-ScannerConfigOptionsDialog.siProvider.command.errorMessage=Must enter compiler invocation command
-ScannerConfigOptionsDialog.apply.progressMessage=Setting scanner configuration discovery options...
-ScannerConfigOptionsDialog.common.variables.button=Variables...
-
-ScannerConfigOptionsDialog.unsavedchanges.title=Setting C/C++ Make Project Discovery Options 
-ScannerConfigOptionsDialog.unsavedchanges.message=The C/C++ Make Project Discovery Options property page contains unsaved modifications. Do you want to save changes so that other discovery related settings can be updated?
-ScannerConfigOptionsDialog.unsavedchanges.button.save=Apply
-ScannerConfigOptionsDialog.unsavedchanges.button.cancel=Cancel
-
-ScannerConfigOptionsDialog.error.title=Error Setting Project Discovery options
-ScannerConfigOptionsDialog.error.message=An error occurred while setting the project discovery options
-
-# --- DiscoveredScannerConfigurationContainerPage ---
-DiscoveredScannerConfigurationContainerPage.title=Edit container
-DiscoveredScannerConfigurationContainerPage.description=Manage discovered scanner configuration
-DiscoveredScannerConfigurationContainerPage.list.title=Discovered include paths and symbol definitions
-DiscoveredScannerConfigurationContainerPage.initialization.error.message=Error initializing Discovered paths container
-
-# new strings
-
-AbstractCPropertyTab.0=Select build variable
-AbstractCPropertyTab.1=Variables...
-AbstractCPropertyTab.2=This tab is not supported in multi-configuration mode
-AbstractPage.0=Unknown element selected
-AbstractPage.1=This file has no properties to display
-AbstractPage.12=Manage Configurations...
-AbstractPage.11=setProjectDescription: 
-AbstractPage.10=Cannot create resource configuration for 
-AbstractPage.13=Cannot load 
-AbstractPage.14=Cannot create page: 
-AbstractPage.15=element not initialized.
-AbstractPage.16=[ Active ]
-AbstractPage.2=This project is not a CDT project
-AbstractPage.3=Error while accessing new configuration. <Apply> cannot work. Use <OK>.
-AbstractPage.4=[ All configurations ]
-AbstractPage.5=[ Multiple configurations...]
-AbstractPage.6=Configuration: 
-AbstractPage.7=Exclude resource from build
-AbstractPage.8=Cannot apply
-AbstractPage.9=Internal error
-AbstractPage.rebuildIndex.question=Changes to the include search paths or defined symbols will not be reflected in the index until it is rebuilt. Do you wish to rebuild it now?
-
-AbstractLangsListTab.0=Show built-in values
-AbstractLangsListTab.1=Languages
-AbstractLangsListTab.2=Export
-AbstractLangsListTab.3=\ [exp]
-AbstractLangsListTab.4=Unexport
-AbstractPrefPage.0=\ Preference settings will be applied to new projects \n only when there were no toolchains selected.
-AbstractExportTab.0=[All]
-AbstractExportTab.1=[List]
-AbstractExportTab.2=Create...
-AbstractExportTab.3=Edit...
-CLocationTab.0=Filter (empty)
-CLocationTab.1=Filter (
-CLocationTab.2=, 
-CLocationTab.3=)
-CLocationTab.4=Add Folder...
-CLocationTab.5=Link Folder...
-CLocationTab.6=Edit Filter...
-CLocationTab.7=Delete
-CLocationTab.8=<root folder>
-CLocationSourceTab.0=Source folders on build path:
-CLocationOutputTab.0=Output folders on build path:
-EnvDialog.0=Name:
-EnvDialog.1=Value:
-EnvDialog.2=Variables
-EnvDialog.3=Add to all configurations
-EnvironmentTab.0=Environment variables to set
-EnvironmentTab.1=Variable
-EnvironmentTab.10=New variable
-EnvironmentTab.11=Edit variable
-EnvironmentTab.12=Variables list
-EnvironmentTab.13=Add to all configurations
-EnvironmentTab.14=Select variables
-EnvironmentTab.15=Current String List DISPLAY mode. Double-click to change
-EnvironmentTab.16=Origin
-EnvironmentTab.17=CONJ.
-EnvironmentTab.18=DISJ.
-EnvironmentTab.19=DISPL mode: 
-EnvironmentTab.2=Value
-EnvironmentTab.20=<UNDEFINED> 
-EnvironmentTab.21=REPLACE
-EnvironmentTab.22=WRITE mode: 
-EnvironmentTab.23=Current String List WRITE mode. Double-click to change
-EnvironmentTab.24=MODIFY
-EnvironmentTab.3=Append variables to native environment
-EnvironmentTab.4=Replace native environment with specified one
-EnvironmentTab.5=Add...
-EnvironmentTab.6=Select...
-EnvironmentTab.7=Edit...
-EnvironmentTab.8=Delete
-EnvironmentTab.9=Undefine
-IncludeTab.0=Include directories
-IncludeTab.1=Add directory path
-IncludeTab.2=Change directory path
-IncludeFileTab.0=Include files
-IncludeFileTab.1=Add include file
-IncludeFileTab.2=Change include file
-IncludeDialog.0=Directory:
-IncludeDialog.1=File:
-IncludeDialog.2=Add to all configurations
-IncludeDialog.3=Add to all languages
-LanguagesTab.0=Content type
-LanguagesTab.1=Language
-LibraryPathTab.1=Add...
-LibraryPathTab.2=Edit...
-LibraryTab.1=Add...
-LibraryTab.2=Edit...
-RefsTab.0=Expand All
-RefsTab.2=Collapse All
-RefsTab.3=Active
-RefsTab.4=Projects list
-SymbolTab.0=Symbol
-SymbolTab.1=Value
-SymbolTab.2=Add symbol
-SymbolTab.3=Change symbol
-ExpDialog.0=To all configurations
-ExpDialog.1=Save to: 
-ExpDialog.2=Languages
-ExpDialog.3=Content types
-ExpDialog.4=Is a workspace path
-ExpDialog.5=Apply to all
-ExpDialog.6=Name:
-ExpDialog.7=Value:
-ExpDialog.8=Name cannot be empty.
-ExpDialog.9=The same name already exists.
-ExpDialog.10=Value cannot be empty.
-ConfigMultiSelectionDialog.0=Select configurations
-ConfigMultiSelectionDialog.1=At least 2 configurations should be selected
-SymbolDialog.0=Name:
-SymbolDialog.1=Value:
-ConfigDescriptionTab.0=Project Description
-ConfigDescriptionTab.1=Configuration Description
-ConfigDescriptionTab.2=Resource Description
-BinaryParsTab.0=Binary parser:
-ErrorParsTab.error.NonEmptyName=Specify non empty name
-ErrorParsTab.error.NonUniqueID=Error parser ID is not unique, specify different name
-ErrorParsTab.error.OnApplyingSettings=Error applying Error Parser Tab settings
-ErrorParsTab.error.OnRestoring=Error restoring default Error Parser Tab settings
-ErrorParsTab.error.NonAccessibleID=[ Not accessible id={0} ]
-ErrorParsTab.error.IllegalCharacter=Special character ''{0}'' is not allowed
-ErrorParsTab.label.EnterName=Enter name of new error parser:
-ErrorParsTab.label.DefaultRegexErrorParserName=Regex Error Parser
-ErrorParsTab.message.ConfirmReset=Are you sure you want to delete all customized error parsers?
-ErrorParsTab.title.Add=Add Regex Error Parser
-ErrorParsTab.title.ConfirmReset=Confirm Resetting Error Parsers
-ErrorParsTab.title.Edit=Edit Regex Error Parser name
-StructureTreeTab.0=Level: 
-StructureTreeTab.1=Maximal tree nesting
-StructureTreeTab.2=Long
-StructureTreeTab.3=String
-StructureTreeTab.4=Object to view: 
-StructureTreeTab.5=Expand all
-StructureTreeTab.6=Expand level...
-StructureTreeTab.7=Collapse all
-StructureTreeTab.8=Property
-StructureTreeTab.9=Value
-StructureTreeTab.10=Class
-StructureTreeTab.11=Wait...
-PrefPage_PropertyPage.0=These settings will affect behavior of CDT property pages
-
-CConfigWizardPage.0=Select Configurations
-CConfigWizardPage.1=Select platforms and configurations you wish to deploy on
-CConfigWizardPage.4=Project type:
-CConfigWizardPage.5=Toolchains:
-CConfigWizardPage.6=Configurations: 
-CConfigWizardPage.7=Select all
-CConfigWizardPage.8=Deselect all
-CConfigWizardPage.9=Edit properties after project creation
-CConfigWizardPage.10=At least one configuration should be available. Project cannot be created.
-CConfigWizardPage.11=At least one configuration should be selected. Please check needed configurations.
-CConfigWizardPage.12=Use "Advanced settings" button to edit project's properties.\n\nAdditional configurations can be added after project creation.\nUse "Manage configurations" buttons either on toolbar or on property pages. 
-CConfigWizardPage.13=Advanced settings...
-
-CMainWizardPage.0=Project type:
-CMainWizardPage.1=Show project types and toolchains only if they are supported on the platform
-CMainWizardPage.10=A project with that name already exists in the workspace.
-CMainWizardPage.2=Edit properties after project creation
-CMainWizardPage.3=No project types available. Project cannot be created
-CMainWizardPage.5=Cannot create ICProjectTypeHandler: 
-CMainWizardPage.6=File with specified name already exists.
-CMainWizardPage.7=Directory with specified name already exists.
-CMainWizardPage.8=Project name:
-CMainWizardPage.9=Project name is empty
-
-ProjectContentsArea.0=Browse...
-ProjectContentsArea.1=Use default location
-ProjectContentsArea.2=Location:
-ProjectContentsArea.3=Invalid location path
-ProjectContentsArea.4=Project contents directory must be specified
-ProjectContentsArea.5=Select directory:
-ProjectContentsArea.6=Project path should be absolute
-ProjectContentsArea.7=Project path is not valid
-ProjectContentsArea.8=Cannot create given path
-ProjectContentsArea.9=File with given name already exists
-StdProjectTypeHandler.0=-- Other Toolchain --
-StdProjectTypeHandler.2=Default
-StdProjectTypeHandler.3=creation Make project: IBuilder is null
-
-CDTConfigWizardPage.0=Select configurations
-CDTCommonProjectWizard.0=Old project will be overridden
-CDTCommonProjectWizard.1=Existing project settings will be overridden.\nImport feature can be used instead to preserve old settings.\nOK to override ?
-CDTCommonProjectWizard.creatingProject=Creating project
-NewModelProjectWizard.0=CDT Project
-NewModelProjectWizard.1=Create CDT project of selected type
-NewModelProjectWizard.2=C++ Project
-NewModelProjectWizard.3=Create C++ project of selected type
-NewModelProjectWizard.4=C Project
-NewModelProjectWizard.5=Create C project of selected type
-BuildVarListDialog_0=Type:
-BuildVarListDialog_1=Text list
-BuildVarListDialog_2=File path
-BuildVarListDialog_3=List of File paths
-BuildVarListDialog_4=Directory path
-BuildVarListDialog_5=List of Directory paths
-BuildVarListDialog_6=Any path
-BuildVarListDialog_7=List of any paths
-BuildVarListDialog_8=Text
-BuildVarListDialog.0=<not available>
-BuildVarListDialog.1=Build variables
-StringVariableSelectionDialog_message=&Choose a variable (? = any character, * = any string):
-StringVariableSelectionDialog_columnDescription=&Variable Description:
-NewCfgDialog.0=
-NewCfgDialog.1=
-NewCfgDialog.2=Cannot create new configuration
-NewCfgDialog.3=-- not selected --
-NewCfgDialog.4=Import from projects
-NewCfgDialog.5=Import predefined
-CDTMainWizardPage.0=Project name cannot contain '\#' symbol
-CDTMainWizardPage.1=Project category is selected. Expand the category and select a concrete project type.
-CProjectWizard.0=Add C Project Nature
-CCProjectWizard.0=Add CC Project Nature
-WorkingSetConfigAction.21=Building project 
-WorkingSetConfigAction.22=Build error
-IncludeTab.export=Export Settings...
-IncludeTab.import=Import Settings...
-